|
Black Market Racing 3.5" downpipe back exhaust for the E82 N54 or N54 BMW 135I. Highest flowing exhaust on the market! The quality, fit and finish of this system is truly amazing and will bring a smile to your face as soon as you open the box! This system is made from top quality T304 3.5" diameter stainless steel, features a mid mounted muffler and was designed, built and tested here in the USA. ... |
"Coolant Reservoir/Icebox for your 2012-2015 ZL1 supercharger heat exchanger coolant
Made of .125 tig welded aluminum with BMR custom flush mounted lid
Predrilled for mounting holes - Silicone O ring that won't degrade over time
Black Market Racing's reservoir is designed with the return line through the bottom of the reservoir with the outlet via a drilled tube to allow for filtration of ice ... |
"Coolant Reservoir/Icebox for your 2009-2015 CTS-V supercharger heat exchanger coolant
Made of .125 tig welded aluminum with BMR custom flush mounted lid
Predrilled for mounting holes - Silicone O ring that won't degrade over time
Black Market Racing's reservoir is designed with the return line through the bottom of the reservoir with the outlet via a drilled tube to allow for filtration of ... |
If you're over driving your factory or aftermarket Heartbeat 2300 supercharger, your 4" or even 4.5" intake will cause a parasitic loss and increased IAT2 temps when trying to inhale the air in the higher RPM range. By going to a larger intake tube, the air can move more freely into the throttlebody and snout to be compressed inside the supercharger. ... |
When going for big power and great looks on your custom turbo build look no further! Black Market Racing's Air to Water intake manifold is perfect for LS swapped builds. Designed on the CTS-V, this AW setup is lower profile then the competition for those tight applications! Will work on LS3, LS9, LSA and LS7* applications. 3" Core is efficient up to 1300 whp applications.
4" Core is ... |
"Black Market Racing offers this Downpipe and mid pipe upgrades for your 2015+ Mercedes AMG GT-S in both catted and non catted configurations. Our kit stands out from the rest of the options on the market by featuring true 3.5"" piping throughout. Catted version supports up to 900 crank hp. Bolts up to stock exhaust, or available as a full turbo back system tig welded in house by Black Market ... |
|
Black Market Racing 3.5" downpipe back exhaust for the E9X N54 or N54 BMW 335I. Highest flowing exhaust on the market! The quality, fit and finish of this system is truly amazing and will bring a smile to your face as soon as you open the box! This system is made from top quality T304 3.5" diameter stainless steel, features a mid mounted muffler and was designed, built and tested here in the USA. ... |
"LS3/LSA Bottom Mount T4 Turbo Exhaust Manifolds
Black Market Racing's schedule 40 304 SS manifolds come with a lifetime warranty and will give you exactly what you are looking for, for your turbo build! They are Single scroll T4 with Single 44mm Wastegate Flanges ... |
"If you're over driving your factory or aftermarket Heartbeat 2300 supercharger, your 4"" or even 4.5"" intake will cause a parasitic loss and increased IAT2 temps when trying to inhale the air in the higher RPM range. By going to a larger intake tube, the air can move more freely into the throttlebody and snout to be compressed inside the supercharger. Most aftermarket intakes are also made of ... |
These are perfect for Porsche 996 owners looking to replace or upgrade the factory wing. The stock wing has threaded inserts which tend either damage the wing upon removal or damage the inserts themselves. Save yourself the headache and potential damage by purchasing this replacement set today. Works with both the OEM wing rises or the Rennkit wing riser setup.
These fit 1997 to 2004(and some ... |
This fitting kit includes the required push lock fittings to adapt to the stock intercooler hoses in your Hellcat. Black in Color. ... |
Billet Aluminum Handle for Black Market Racing Coolant ... Part No: BMR_ICEBOX_LID_HANDLE |
|
With Superchargers maxing at 800whp full tilt, BMR decided to raise the bar and give CTS-V owners what they wanted. The BMR CTS-V twin turbo kit performs as good as it looks! With our test car we made 1396 whp on E85 at just under 25 psi peak boost. This kit will fit with the stock LSA/LS3 block style, or upgraded LSX block configurations.
Our Manifolds will hold T4 turbos up to Borgwarner EFR ... |
Open up the intake side of your Hellcat and listen to the supercharger scream with this 5" intake built here in house at Black Market Racing. The Black Market Racing 5" intake and heat shield fits 2015-2016 model year Hellcats with MAF sensors. By going to a larger diameter intake tube the air can move more freely into the throttlebody and snout to be compressed inside the supercharger. Most ... |
Fitting and Line Kit for Dodge Challenget and Charger Catch Can by Black Market ... |
This kit included a Bosch auxiliary coolant pump and matching pigtail. It also includes a relay, relay holder and fuse holder for a complete and proper install. The additional coolant pump acts as a helper pump to circulate the coolant through the additional length of hose required for a trunk mounted tank and reduces strain on the single pump located underhood. ... |
LED Light Bar Kit for 2015 and newer Subaru Impreza WRX and WRX STI from Black Market Racing.
Are you looking for something to set your ride off from others and also add some function!? You can light up the night with this 30"" LED light bar and bracket kit from Black Market Racing. Using the custom brackets built by Black Market Racing it bolts right into place using existing holes from the ... |
With Superchargers maxing at 800whp full tilt, BMR decided to raise the bar and give CTS-V owners what they wanted. The BMR CTS-V twin turbo kit performs as good as it looks! With our test car we made 1396 whp on E85 octane at just under 25 psi peak boost. This kit will fit with the stock LSA/LS3 block style, or upgraded LSX block configurations.
Our Manifolds will hold T4 turbos up to ... |
With Superchargers maxing at 800whp full tilt, BMR decided to raise the bar and give CTS-V owners what they wanted. The BMR CTS-V twin turbo kit performs as good as it looks! With our test car we made 1396 whp on E85 at just under 25 psi peak boost. This kit will fit with the stock LSA/LS3 block style, or upgraded LSX block configurations.
Our Manifolds will hold T4 turbos up to Borgwarner EFR ... |
AN Fitting Kit for Gen 2 CTSV Heat Exchanger Reservoir. Includes 2x black pushlock style AN Fittings. ... |
With Superchargers maxing at 800whp full tilt, BMR decided to raise the bar and give CTS-V owners what they wanted. The BMR CTS-V twin turbo kit performs as good as it looks! With our test car we made 1396 whp on E85 at just under 25 psi peak boost. This kit will fit with the stock LSA/LS3 block style, or upgraded LSX block configurations.
Our Manifolds will hold T4 turbos up to Borgwarner EFR ... |
This fitting kit includes the required push lock fittings, approximately 40 ft of coolant hose and hoseclamps to install the trunk mounted heat exchanger reservoir/ice box in your ATS-V. ... |
This kit includes two black -12AN fittings to adapt to the stock intercooler hoses found in the Hellcat. ... Part No: BMR_HC_ICEBOX_FITKIT |
Fitting and Line Kit for Gen 2 CTS-V Catch Can by Black Market Racing. Fits both sealed and vented catch cans. Includes 2x push lock AN hose adapter fittings and pcv hose to and from catch can. ... |
AN Fitting Kit for ZL1 Heat Exchanger Reservoir by Black Market Racing. Includes 2x black pushlock style fittings to adapt to factory intercooler hoses. ... |